Olympus OM-D E-M5 Mark III vs Fujifilm X-T30 Comparison

change cameras »
OM-D E-M5 Mark III image
vs
X-T30 image
Olympus OM-D E-M5 Mark III Fujifilm X-T30
Megapixels
20.40
26.10
Image resolution
5184 x 3888
6240 x 4160

Sensor

Sensor type
CMOS
CMOS
Sensor size
Four Thirds (17.3 x 13 mm)
23.5 x 15.6 mm
Sensor resolution
5208 x 3916
6277 x 4157
Diagonal
21.64 mm
28.21 mm
Compare sensor size:

Sensor Size

Actual size is set to screen
vs
1:1.63
(ratio)
Olympus OM-D E-M5 Mark III Fujifilm X-T30
Surface area:
224.90 mm² vs 366.60 mm²
Difference: 141.7 mm² (63%)
X-T30 sensor is ~1.63x bigger than OM-D E-M5 Mark III's.
Pixel pitch
3.32 µm
3.74 µm
Difference: 0.42 µm (13%)
Pixel pitch of X-T30 is ~13% higher than OM-D E-M5 Mark III's.
Pixel area
11.02 µm²
13.99 µm²
Relative pixel sizes:
vs
Pixel area difference: 2.97 µm² (27%)
Pixel on Fujifilm X-T30 sensor is ~27% bigger than Olympus OM-D E-M5 Mark III's.
Pixel density
9.06 MP/cm²
7.13 MP/cm²
Difference: 1.93 µm (27%)
Olympus OM-D E-M5 Mark III has ~27% higher pixel density than Fujifilm X-T30's.

Specs

Olympus OM-D E-M5 Mark III
Fujifilm X-T30
Crop factor
2
1.53
Total megapixels
21.80
Optical zoom
 
Digital zoom
ISO range
Auto, 64-25600
Auto, 160-12800 (extends to 80-51200)
RAW support
Manual focus
Focus range
n/a
Macro focus range
n/a
Focal length
n/a
Aperture priority
Max. aperture
n/a
Metering types
Multi, Center-weighted, Spot
Multi, Center-weighted, Average, Spot
Exposure compensation
±5 EV (in 1/3 EV, 1/2 EV, 1 EV steps)
±5 EV (in 1/3 EV steps)
Shutter priority
Shutter speed (min)
60s
30s
Shutter speed (max)
1/32000s
1/4000s
Built-in flash
External flash
Viewfinder type
Electronic
Electronic
White balance
7
7
Screen size
3"
3"
Screen resolution
1,037,000 dots
1,040,000 dots
Video available
Video resolution
4096x2160
4096x2160
Video modes
24p
30p/25p/24p
Storage type
SD/SDHC/SDXC
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
USB 3.0 (5 GBit/sec)
HDMI
Wireless support
GPS
Battery model
BLS-50
NP-W126S
Battery type
lithium-ion
Li-ion
Weight
414g
383g
Body size
125.3 x 85.2 x 49.7 mm
118.4 x 82.8 x 46.8 mm
Released
2019
2019


Compare various cameras

vs

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height

Olympus OM-D E-M5 Mark III diagonal

w = 17.30 mm
h = 13.00 mm
Diagonal =  17.30² + 13.00²   = 21.64 mm

Fujifilm X-T30 diagonal

w = 23.50 mm
h = 15.60 mm
Diagonal =  23.50² + 15.60²   = 28.21 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

OM-D E-M5 Mark III sensor area

Width = 17.30 mm
Height = 13.00 mm

Surface area = 17.30 × 13.00 = 224.90 mm²

X-T30 sensor area

Width = 23.50 mm
Height = 15.60 mm

Surface area = 23.50 × 15.60 = 366.60 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

OM-D E-M5 Mark III pixel pitch

Sensor width = 17.30 mm
Sensor resolution width = 5208 pixels
Pixel pitch =   17.30  × 1000  = 3.32 µm
5208

X-T30 pixel pitch

Sensor width = 23.50 mm
Sensor resolution width = 6277 pixels
Pixel pitch =   23.50  × 1000  = 3.74 µm
6277


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

OM-D E-M5 Mark III pixel area

Pixel pitch = 3.32 µm

Pixel area = 3.32² = 11.02 µm²

X-T30 pixel area

Pixel pitch = 3.74 µm

Pixel area = 3.74² = 13.99 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels)² / 1000000
sensor width in cm

One could also use this formula:
Pixel density =   effective megapixels × 1000000 / 10000
sensor surface area in mm²

OM-D E-M5 Mark III pixel density

Sensor resolution width = 5208 pixels
Sensor width = 1.73 cm

Pixel density = (5208 / 1.73)² / 1000000 = 9.06 MP/cm²

X-T30 pixel density

Sensor resolution width = 6277 pixels
Sensor width = 2.35 cm

Pixel density = (6277 / 2.35)² / 1000000 = 7.13 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

OM-D E-M5 Mark III sensor resolution

Sensor width = 17.30 mm
Sensor height = 13.00 mm
Effective megapixels = 20.40
r = 17.30/13.00 = 1.33
X =  20.40 × 1000000  = 3916
1.33
Resolution horizontal: X × r = 3916 × 1.33 = 5208
Resolution vertical: X = 3916

Sensor resolution = 5208 x 3916

X-T30 sensor resolution

Sensor width = 23.50 mm
Sensor height = 15.60 mm
Effective megapixels = 26.10
r = 23.50/15.60 = 1.51
X =  26.10 × 1000000  = 4157
1.51
Resolution horizontal: X × r = 4157 × 1.51 = 6277
Resolution vertical: X = 4157

Sensor resolution = 6277 x 4157


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


OM-D E-M5 Mark III crop factor

Sensor diagonal in mm = 21.64 mm
Crop factor =   43.27  = 2
21.64

X-T30 crop factor

Sensor diagonal in mm = 28.21 mm
Crop factor =   43.27  = 1.53
28.21

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

OM-D E-M5 Mark III equivalent aperture

Aperture is a lens characteristic, so it's calculated only for fixed lens cameras. If you want to know the equivalent aperture for Olympus OM-D E-M5 Mark III, take the aperture of the lens you're using and multiply it with crop factor.

Crop factor for Olympus OM-D E-M5 Mark III is 2

X-T30 equivalent aperture

Aperture is a lens characteristic, so it's calculated only for fixed lens cameras. If you want to know the equivalent aperture for Fujifilm X-T30, take the aperture of the lens you're using and multiply it with crop factor.

Crop factor for Fujifilm X-T30 is 1.53

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.