Fujifilm X-Pro3 vs Sony Alpha A7 III Comparison

change cameras »
X-Pro3 image
vs
Alpha A7 III image
Fujifilm X-Pro3 Sony Alpha A7 III
Megapixels
26.10
24.20
Image resolution
6240 x 4160
6000 x 4000

Sensor

Sensor type
CMOS
CMOS
Sensor size
23.5 x 15.6 mm
35.6 x 23.8 mm
Sensor resolution
6277 x 4157
6026 x 4017
Diagonal
28.21 mm
42.82 mm
Compare sensor size:

Sensor Size

Actual size is set to screen
vs
1:2.31
(ratio)
Fujifilm X-Pro3 Sony Alpha A7 III
Surface area:
366.60 mm² vs 847.28 mm²
Difference: 480.68 mm² (131%)
Alpha A7 III sensor is ~2.31x bigger than X-Pro3's.
Pixel pitch
3.74 µm
5.91 µm
Difference: 2.17 µm (58%)
Pixel pitch of Alpha A7 III is ~58% higher than X-Pro3's.
Pixel area
13.99 µm²
34.93 µm²
Relative pixel sizes:
vs
Pixel area difference: 20.94 µm² (150%)
Pixel on Sony Alpha A7 III sensor is ~150% bigger than Fujifilm X-Pro3's.
Pixel density
7.13 MP/cm²
2.87 MP/cm²
Difference: 4.26 µm (148%)
Fujifilm X-Pro3 has ~148% higher pixel density than Sony Alpha A7 III's.

Specs

Fujifilm X-Pro3
Sony Alpha A7 III
Crop factor
1.53
1.01
Total megapixels
n/a
25.30
Optical zoom
 
Digital zoom
n/a
ISO range
Auto, 160-12800 (extendable to 80-51200)
100-25600 (expands to 50 - 204800)
RAW support
Manual focus
Focus range
n/a
Macro focus range
n/a
Focal length
n/a
Aperture priority
Max. aperture
n/a
Metering types
Multi, Center-weighted, Average, Spot
Multi, Center-weighted, Highlight-weighted, Spot
Exposure compensation
±5 EV (in 1/3 EV steps)
±5 EV (in 1/3 EV, 1/2 EV steps)
Shutter priority
Shutter speed (min)
30s
30s
Shutter speed (max)
1/32000s
1/8000s
Built-in flash
External flash
Viewfinder type
Electronic and Optical (tunnel)
Electronic
White balance
7
10
Screen size
3"
3"
Screen resolution
1,620,000 dots
921,600 dots
Video available
Max. video resolution
4096x2160 (30p/​25p/​24p)
3840x2160 (30p/25p/24p)
Storage type
SD/SDHC/SDXC
SD/SDHC/SDXC, MS Duo/Pro Duo/Pro-HG Duo
USB
USB 3.0 (5 GBit/sec)
USB 3.0 (5 GBit/sec)
HDMI
Wireless support
GPS
Battery model
NP-W126S
NP-FZ100
Battery type
lithium-ion
lithium-ion
Weight
497g
650g
Body size
140.5 x 82.8 x 46.1 mm
126.9 x 95.6 x 73.7 mm
Released
2019
2018


Compare various cameras

vs

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height

Fujifilm X-Pro3 diagonal

w = 23.50 mm
h = 15.60 mm
Diagonal =  23.50² + 15.60²   = 28.21 mm

Sony Alpha A7 III diagonal

w = 35.60 mm
h = 23.80 mm
Diagonal =  35.60² + 23.80²   = 42.82 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

X-Pro3 sensor area

Width = 23.50 mm
Height = 15.60 mm

Surface area = 23.50 × 15.60 = 366.60 mm²

Alpha A7 III sensor area

Width = 35.60 mm
Height = 23.80 mm

Surface area = 35.60 × 23.80 = 847.28 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

X-Pro3 pixel pitch

Sensor width = 23.50 mm
Sensor resolution width = 6277 pixels
Pixel pitch =   23.50  × 1000  = 3.74 µm
6277

Alpha A7 III pixel pitch

Sensor width = 35.60 mm
Sensor resolution width = 6026 pixels
Pixel pitch =   35.60  × 1000  = 5.91 µm
6026


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

X-Pro3 pixel area

Pixel pitch = 3.74 µm

Pixel area = 3.74² = 13.99 µm²

Alpha A7 III pixel area

Pixel pitch = 5.91 µm

Pixel area = 5.91² = 34.93 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels)² / 1000000
sensor width in cm

One could also use this formula:
Pixel density =   effective megapixels × 1000000 / 10000
sensor surface area in mm²

X-Pro3 pixel density

Sensor resolution width = 6277 pixels
Sensor width = 2.35 cm

Pixel density = (6277 / 2.35)² / 1000000 = 7.13 MP/cm²

Alpha A7 III pixel density

Sensor resolution width = 6026 pixels
Sensor width = 3.56 cm

Pixel density = (6026 / 3.56)² / 1000000 = 2.87 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

X-Pro3 sensor resolution

Sensor width = 23.50 mm
Sensor height = 15.60 mm
Effective megapixels = 26.10
r = 23.50/15.60 = 1.51
X =  26.10 × 1000000  = 4157
1.51
Resolution horizontal: X × r = 4157 × 1.51 = 6277
Resolution vertical: X = 4157

Sensor resolution = 6277 x 4157

Alpha A7 III sensor resolution

Sensor width = 35.60 mm
Sensor height = 23.80 mm
Effective megapixels = 24.20
r = 35.60/23.80 = 1.5
X =  24.20 × 1000000  = 4017
1.5
Resolution horizontal: X × r = 4017 × 1.5 = 6026
Resolution vertical: X = 4017

Sensor resolution = 6026 x 4017


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


X-Pro3 crop factor

Sensor diagonal in mm = 28.21 mm
Crop factor =   43.27  = 1.53
28.21

Alpha A7 III crop factor

Sensor diagonal in mm = 42.82 mm
Crop factor =   43.27  = 1.01
42.82

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

X-Pro3 equivalent aperture

Aperture is a lens characteristic, so it's calculated only for fixed lens cameras. If you want to know the equivalent aperture for Fujifilm X-Pro3, take the aperture of the lens you're using and multiply it with crop factor.

Crop factor for Fujifilm X-Pro3 is 1.53

Alpha A7 III equivalent aperture

Aperture is a lens characteristic, so it's calculated only for fixed lens cameras. If you want to know the equivalent aperture for Sony Alpha A7 III, take the aperture of the lens you're using and multiply it with crop factor.

Crop factor for Sony Alpha A7 III is 1.01

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.