Fujifilm X-A7 vs Olympus Tough TG-5 Comparison

change cameras »
X-A7 image
vs
Tough TG-5 image
Fujifilm X-A7 Olympus Tough TG-5
Megapixels
24.20
12.00
Image resolution
6000 x 4000
4000 x 3000

Sensor

Sensor type
CMOS
CMOS
Sensor size
23.5 x 15.7 mm
1/2.3" (approx. 6.16 x 4.62 mm)
Sensor resolution
6026 x 4017
3995 x 3004
Diagonal
28.26 mm
7.70 mm
Compare sensor size:

Sensor Size

Actual size is set to screen
vs
12.96:1
(ratio)
Fujifilm X-A7 Olympus Tough TG-5
Surface area:
368.95 mm² vs 28.46 mm²
Difference: 340.49 mm² (1196%)
X-A7 sensor is ~12.96x bigger than TG-5's.
Pixel pitch
3.9 µm
1.54 µm
Difference: 2.36 µm (153%)
Pixel pitch of X-A7 is ~153% higher than TG-5's.
Pixel area
15.21 µm²
2.37 µm²
Relative pixel sizes:
vs
Pixel area difference: 12.84 µm² (542%)
Pixel on Fujifilm X-A7 sensor is ~542% bigger than Olympus TG-5's.
Pixel density
6.58 MP/cm²
42.06 MP/cm²
Difference: 35.48 µm (539%)
Olympus TG-5 has ~539% higher pixel density than Fujifilm X-A7's.

Specs

Fujifilm X-A7
Olympus TG-5
Crop factor
1.53
5.62
Total megapixels
n/a
12.70
Optical zoom
n/a
4x
Digital zoom
n/a
ISO range
Auto, 100-12800 (extendable to 25600)
Auto, 100-12800
RAW support
Manual focus
Focus range
n/a
10 cm
Macro focus range
n/a
1 cm
Focal length
n/a
25 - 100 mm
Aperture priority
Max. aperture
n/a
f2 - f4.9
Metering types
Multi, Average, Spot
Multi, Spot
Exposure compensation
±5 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Shutter speed (min)
30s
4s
Shutter speed (max)
1/32000s
1/2000s
Built-in flash
External flash
Viewfinder type
None
None
White balance
7
5
Screen size
3.5"
3"
Screen resolution
2,760,000 dots
460,800 dots
Video available
Max. video resolution
3840x2160 (30p/​25p/​24p)
3840x2160 (30p/25p)
Storage type
SD/SDHC/SDXC
SD/SDHC/SDXC
USB Version
2.0 (480 Mbit/sec)
2.0 (480 Mbit/sec)
HDMI
Wireless support
GPS
Battery model
NP-W126S
LI-92B
Battery type
lithium-ion
lithium-ion
Weight
320g
250g
Body size
119 x 67.7 x 41.1 mm
113 x 66 x 31.9 mm
Released
2019
2017


Compare various cameras

vs

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height

Fujifilm X-A7 diagonal

w = 23.50 mm
h = 15.70 mm
Diagonal =  23.50² + 15.70²   = 28.26 mm

Olympus TG-5 diagonal

The diagonal of TG-5 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of that value - 7.7 mm. If you want to know why, see sensor sizes.

w = 6.16 mm
h = 4.62 mm
Diagonal =  6.16² + 4.62²   = 7.70 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

X-A7 sensor area

Width = 23.50 mm
Height = 15.70 mm

Surface area = 23.50 × 15.70 = 368.95 mm²

TG-5 sensor area

Width = 6.16 mm
Height = 4.62 mm

Surface area = 6.16 × 4.62 = 28.46 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

X-A7 pixel pitch

Sensor width = 23.50 mm
Sensor resolution width = 6026 pixels
Pixel pitch =   23.50  × 1000  = 3.9 µm
6026

TG-5 pixel pitch

Sensor width = 6.16 mm
Sensor resolution width = 3995 pixels
Pixel pitch =   6.16  × 1000  = 1.54 µm
3995


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

X-A7 pixel area

Pixel pitch = 3.9 µm

Pixel area = 3.9² = 15.21 µm²

TG-5 pixel area

Pixel pitch = 1.54 µm

Pixel area = 1.54² = 2.37 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels)² / 1000000
sensor width in cm

One could also use this formula:
Pixel density =   effective megapixels × 1000000 / 10000
sensor surface area in mm²

X-A7 pixel density

Sensor resolution width = 6026 pixels
Sensor width = 2.35 cm

Pixel density = (6026 / 2.35)² / 1000000 = 6.58 MP/cm²

TG-5 pixel density

Sensor resolution width = 3995 pixels
Sensor width = 0.616 cm

Pixel density = (3995 / 0.616)² / 1000000 = 42.06 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

X-A7 sensor resolution

Sensor width = 23.50 mm
Sensor height = 15.70 mm
Effective megapixels = 24.20
r = 23.50/15.70 = 1.5
X =  24.20 × 1000000  = 4017
1.5
Resolution horizontal: X × r = 4017 × 1.5 = 6026
Resolution vertical: X = 4017

Sensor resolution = 6026 x 4017

TG-5 sensor resolution

Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 12.00
r = 6.16/4.62 = 1.33
X =  12.00 × 1000000  = 3004
1.33
Resolution horizontal: X × r = 3004 × 1.33 = 3995
Resolution vertical: X = 3004

Sensor resolution = 3995 x 3004


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


X-A7 crop factor

Sensor diagonal in mm = 28.26 mm
Crop factor =   43.27  = 1.53
28.26

TG-5 crop factor

Sensor diagonal in mm = 7.70 mm
Crop factor =   43.27  = 5.62
7.70

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

X-A7 equivalent aperture

Aperture is a lens characteristic, so it's calculated only for fixed lens cameras. If you want to know the equivalent aperture for Fujifilm X-A7, take the aperture of the lens you're using and multiply it with crop factor.

Crop factor for Fujifilm X-A7 is 1.53

TG-5 equivalent aperture

Crop factor = 5.62
Aperture = f2 - f4.9

35-mm equivalent aperture = (f2 - f4.9) × 5.62 = f11.2 - f27.5

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.